Questions? Feedback? powered by Olark live chat software

Wema Fuel Senders

Wema Fuel Senders

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Item# S5U            
Length Measurement: Sending Unit length should be a minimum of one (1) inch less than the plastic tank depth, and three quarters (0.75) of an inch less than the metal tank depth. Note: If metal tank  surface flexes, deduct one (1) inch from the depth. (like plastic tank) 

Lengths Available: Four (4) through sixty (60) inches, with one inch increments. S3U & S5U sending unit lengths are measured from the top of the threads to probe tip. If you don't see your required size, click on the down arrow next to the closest size to your requirement. 

Material: 316 Type Stainless Steel and operate on a vertical plane (no float arm).

Mounting Method: 1.5 ” NPT, American pipe thread, male, 240 – 30 ohm operation

    Wema Fuel Sender S5U

    $59.00
    Item# S5U Length Measurement:Sending Unit length should be a minimum of one (1) inch less than the plastic tank depth, and three quarters (0.75) of an inch less than the metal tank depth. Note: If metal tank  surface flexes, deduct...
    $59.00
    Quick view
    Qty in Cart: 0
    Price:
    $59.00
    Subtotal:
  • Item# SSS/SSL 
Length Measurement: Sending Unit length should be a minimum of one (1) inch less than the plastic tank depth, and three quarters (0.75) of an inch less than the metal tank depth. Note: If metal tank surface flexes, deduct one (1) inch from the depth. (like plastic tank) 

Lengths Available: Four (4") through Ten (60") inches, with one half (0.5”) inch increments through 18.5”, and one (1) inch increments thereafter.. If you don't see your required size, click on the down arrow next to the closest size to your requirement.

Material: - 316 Type Stainless Steel and operate on a vertical plane (no float arm). 

Mounting Method: SSS & SSL: - Standard SAE 5 hole patterns, 2.125” bolt circle, 240 – 30 ohm operation. Note: Units are supplied with a gasket, but without mounting screws.

    Wema Fuel Sender SSS/SSL

    $59.00
    Item# SSS/SSL Length Measurement:Sending Unit length should be a minimum of one (1) inch less than the plastic tank depth, and three quarters (0.75) of an inch less than the metal tank depth. Note: If metal tank surface flexes, deduct one...
    $59.00
    Qty in Cart: 0
    Price:
    $59.00
    Subtotal:
  • Total: items /

Adding your products to cart